I want to replace the upper ball joint on the rear of my 2015 Subaru Forester Limited. After looking at it I would say you have to replace the upper control arm to the tune of $300 a piece for OEM. Am I looking at this correctly. If so has anybody had any luck with after market control arms with ball joints?
madtown forester
Yeah, it doesn't look like the ball joint is a replaceable part on its own.
I've had good luck with Moog parts, but not this part specifically. The part you need is about $52 +shipping on RockAuto for Moog.
I just replaced both front lower control arms with Moog after a second failed bushing in a Subaru OEM part. Same side, same bad bushing with only 75k on the car. I figure if the Subaru OEM is that bad, I doubt aftermarket can be worse.
I've had good luck with Moog parts, but not this part specifically. The part you need is about $52 +shipping on RockAuto for Moog.
I just replaced both front lower control arms with Moog after a second failed bushing in a Subaru OEM part. Same side, same bad bushing with only 75k on the car. I figure if the Subaru OEM is that bad, I doubt aftermarket can be worse.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
