I was going to suggest the brake light switch, but I'm in the US. When I had the switch replaced (US recall), I was not having issues that I knew about. However after the switch was replaced, I had an issue a few weeks later with all of the lights going crazy when I started the car (out on a Friday, running errands) and was able to get into the dealer... The switch was out of adjustment (loose?) and they fixed and have not had an issue since.

That should be your first check. From my understanding, it's not a huge cost point and is/was an easy fix.

 

Hi Craig.
Thank you for posting a response. I took the switch out today and cleaned the contacts with compressed air. I took a picture before removing it so that I could put it back as it was. Time will tell.

I really appreciate the help, thank you.

 

There’s a TSB on the brake light switch and it shows the adjustment procedure. If it’s off by a few MM, you may get the light show. Just use a paint marker on the adjustment nut. I had the same problem. All good now.

 

Thank you Theseus161.
Where would I find the TSB? Would you perhaps have a link?

Regards
Ronnie