2006 - AT - PCV Help (pictures)?

Sapphire_fozzie · 2025-10-02T17:52:58-0400

Has anyone removed the pcv fitting on a 2006 sohc block before? Pic to show what I’m speaking of. Apparently my brain is on malfunction cuz to me it looks like it should thread out however the outlet off of it looks like it may cause interference. I’m in the process of a Frankenstein rebuild and need that to go on another block. Or if anyone has some clever ideas on what I can use as a replacement would be phenomenal!!! Thank you in advance. I’ll post the swap soon.

stroker ace · 2025-10-02T18:43:49-0400

Sapphire_fozzie · 2025-10-02T19:41:46-0400

So I’m thinking about using the turbo pcv set up. I wonder if that would work 🤔

donkpow · 2025-10-03T07:00:27-0400

It looks like a "Tee" with that tube entering the side of the fitting carrying the equivalent of crankcase vapors and pressure. Where does that tube come from?

Sapphire_fozzie · 2025-10-04T02:12:16-0400

The tube goes to the air intake that comes off the throttle body. The bottom is press fit into the block thank you to stoker ace for sharing the video on it.

I’m considering the turbo pcv set up to not have to pull the fitting the block.

2006 - AT - PCV Help (pictures)?

Our Vendors

Top Contributors this Month

Recommended Communities