Just a post on my 20 forester sports HK amp install with a 15 hk amp.
1st, I would like to thank Chris. I don’t think he is a member here. He sold me the 2015 wrx hk amp at good deal and making this project possible.
After I read the info (see link) regarding the 2015 hk amp can take speaker level input.
I decided to give it a try and located a 15 wrx hk amp with pig tail/connector. Here are some picture of the amp.
this connector is the main input from head unit into the HK amp.
The second picture shows the 2 wires/pins are in different than the newer hk connector. Please see the link below for newer hk amp pin out.
So I decided to build my own harness to connect HU to the HK amp. Here are the adaptors I
top one is to connect to HU. 2nd picture is to connect back to vehicle side.
Here is initial harness.
Please note, the amp to speaker harness has not completed yet as of last week. But you see all connectors from amp and adaptors I used. I used a 18 awg 9 wires speaker bundle for both harnesses.
Please note, I end up connect the power ant wire to send 12v “on” signal to amp.
I have connected my harness and function tested between the HU and amp. Both turned on and radio station plays music.
Will post more tomorrow.
1st, I would like to thank Chris. I don’t think he is a member here. He sold me the 2015 wrx hk amp at good deal and making this project possible.
After I read the info (see link) regarding the 2015 hk amp can take speaker level input.
Parts Needed To Install Aftermarket Head Unit In 2010-up Subaru Legacy/Liberty/Outback
Subaru Legacy Liberty Outback install aftermarket head unit
ae64.com
this connector is the main input from head unit into the HK amp.
The second picture shows the 2 wires/pins are in different than the newer hk connector. Please see the link below for newer hk amp pin out.
So I decided to build my own harness to connect HU to the HK amp. Here are the adaptors I
top one is to connect to HU. 2nd picture is to connect back to vehicle side.
Here is initial harness.
Please note, the amp to speaker harness has not completed yet as of last week. But you see all connectors from amp and adaptors I used. I used a 18 awg 9 wires speaker bundle for both harnesses.
Please note, I end up connect the power ant wire to send 12v “on” signal to amp.
I have connected my harness and function tested between the HU and amp. Both turned on and radio station plays music.
Will post more tomorrow.