[lesteague]

Just wondering what mods people have planned for their beloved Foresters this year.

 

[NorthDownsScooby]

EBC Turbo Grooved discs all round for a start.

 

[yallahyimshi]

Turbo swap, STI TMIC swap, Roofrack, ECUTEK Tuning, Kings Raised Springs,

Maybe more if i have the money and/or time

 

[Nich B]

Fix all the damage I did in the snow
Full suspension swap and geometry check
Fit Sti IC
Fix all the damage caused by someone trying to nick it
Fix all the damage caused by "the football"
Clean it?

 

[Gigsy]

Not sure about 'planned' but on the wish list are to fit the TD04 I have kicking around (and re-remap). and possibly wheels, brakes and STi springs all-round.

However, my FXT is heading for it's 100k service so my mods might be limited to cam-belts and the probability of needing a new clutch later in the year!

 

[mykp]

replace stereo with one I can switch off.
replace brakes with new disks

maybe get the wife to clean it!

 

[fpan]

Maybe a set of wheels coming spring/summer time.

 

[fozzysti]

Hi,
Well just had H&S equal length headers with up pipe fitted, a Grimmspeed 3 port solenoid fitted and the map tweeked by Simon of JGM. Lost the burble but boy does it go! Wasn't really planning on this but H&S did me a good deal.
Should have some Tein coilovers from Rich soon.:Banane35:
Then I reckon an 18G with bigger injectors to suit and another remap, may not be this year though!:shrug:
Happy modding,
Paul

 

[The Rookie]

Finish off my Hybrid turbo and fit along with decat D/P.

Regrease STi struts.

Keep it dirty!

Simon

 

[frazerjames1979]

Fit my damn spoiler if i ever make it back to England for an hour !!

 

[Tussen]

This weekend!
VF-43 ported & polished
06 STi TMIC
Gimmick 3” Turbo Inlet
DW 750 cc injectors
8mm phenolic block to tgv spacers
06 STi intake manifold ported & polished
Prodrive EBCS
Maddad 3” V2 Downpipe
STi Booster and Master Cylinder
PerrinMC Brace
Omori Boost Gauge

Later:
Custom carputer with radio display for virtual gauges

 

[Patrikman]

so gar planned:
-upgraded lighting
-completely upgraded audio system
-new all seasons before next winter
-fix dash rattle that is driving me nuts
-fix inop/leaking rear wiper nozzle
if the budget allows:
-hopefully skid plates
-safari rack

 

[Tuned200]

Paint CDM HID lights and add LED strip--Finished
Add Shifter boot__TBA
Add stock 17" xt wheels for winter--TBA

 

[major]

Finish off JDM folding door mirror (need a switch)
Fit rear spoiler
Fit JDM front grill

Repair central locking ! :chair:

Shoppin for 17" Alloy and WRX seats :biggrin:

 

[frazerjames1979]

so gar planned:
-upgraded lighting
-completely upgraded audio system
-new all seasons before next winter
-fix dash rattle that is driving me nuts
-fix inop/leaking rear wiper nozzle
if the budget allows:
-hopefully skid plates
-safari rack

Green Bay Wisconsin? - Hows the Packers doing?

 

[Mog]

Hi,
Well just had H&S equal length headers with up pipe fitted, a Grimmspeed 3 port solenoid fitted and the map tweeked by Simon of JGM. Lost the burble but boy does it go! Wasn't really planning on this but H&S did me a good deal.
Should have some Tein coilovers from Rich soon.:Banane35:
Then I reckon an 18G with bigger injectors to suit and another remap, may not be this year though!:shrug:
Happy modding,
Paul

I'm running 740 side feed injectors at the moment, fitted by the previous owners incompetant tuning co. These are the cause of my engine failure along with the mapping which was bodged to cover up the wrong choice of injector.
New engine is in and a bespoke Ectek map to run it in (about 1200 miles so far) but I'm going to have to change over to a top feed injector system so that 650 injectors can be used which will allow upto 440bhp before maxing out.
So be careful before going down the bigger injector route as the choice of side feed injectors is limited to say the least.

Mog

 

[Tuned200]

I would also like to add an indash Navi system with DVD if the funds allow.

 

[JBX]

A cast aluminum sump guard from Subaxtreme and a grounding kit.

 

[SubieOutlaw]

in grille Hella 500FF
17" Rota Torques

 

[forester200]

just fitted hks stainless one piece headers and new cam cover gaskets and lowered car another 2 inches on the Teins ......slightly more torque now and sexier looking ...18's to come :woohoo: