Joined
·
5,314 Posts
Caught the front bumper on a curb entering 7-11 @ 6am this morning. Friggin' marine layer was the culprit on this one.
Arghh...I started the day off on a band note.
Arghh...I started the day off on a band note.
Posts by Inactive_22374
1 - 20 of 18467 Posts
Joined
·
5,314 Posts
Mounted tires to rims...and put the black OZ's 18x8 w/ RE01r's back on the car.
Removed the vinyl from my front bumper (evo x look).
Washed the car and did a quick hand wax.
Last but not least.....Oil Change, tire rotation, and alignment.
Gettin' ready for the Auto-X @ El Toro next weekend!
Removed the vinyl from my front bumper (evo x look).
Washed the car and did a quick hand wax.
Last but not least.....Oil Change, tire rotation, and alignment.
Gettin' ready for the Auto-X @ El Toro next weekend!
Joined
·
5,314 Posts
Marine Layer....fog...moisture on the window....in a hurry to work....you get the point.
You must be joking, right? Unless you're talking about a bunch of soldiers coming up from Camp Pendleton and forcing you off the road, I can't see how a "Marine layer" can make you catch your front bumper.
:shake:
Perhaps it's the same way that guy in San Diego says his runaway Prius was really out of control... :shrug:
Joined
·
5,314 Posts
This actually made me laugh out loud when I read it!:biggrin:
Joined
·
5,314 Posts
Got an alignment, removed my STI Lower Arm Bar (Stainless version) <--- FOR SALE , fixed the airbag light on my 07 sti seats (I have a set for sale too!).
Joined
·
5,314 Posts
Re-installed my Subtle black powder coated aero/skid plate and fixed my passenger seats that were throwing an airbag light.
FYI....If you swap 07 STI seats into your SG9 Forester, you must use the passenger occupant sensor module from your stock Forester seat in order to prevent the airbag light on the dash from coming on. You can leave the stock STI side airbags in the seats w/o any issues.
FYI....If you swap 07 STI seats into your SG9 Forester, you must use the passenger occupant sensor module from your stock Forester seat in order to prevent the airbag light on the dash from coming on. You can leave the stock STI side airbags in the seats w/o any issues.
Joined
·
5,314 Posts
What mod is that?
Joined
·
5,314 Posts
Car wash and detailed the wheels
Joined
·
5,314 Posts
Put miles on it...
Met w/ my machinist to pick up the new Legacy & Outback lift kits, stopped by my sheet metal vendor to check the progress of our gauge bezels, splitters, radiator shrouds, etc.
Met w/ my machinist to pick up the new Legacy & Outback lift kits, stopped by my sheet metal vendor to check the progress of our gauge bezels, splitters, radiator shrouds, etc.
Joined
·
5,314 Posts
Installed my new JDM rain gaurds, washed/waxed, detailed interior, replaced dead pedal (autospeed) rubber bumpers that fell off.
About to install the JDM Forester STI bottom lip. I first have to remove my $12 garage lip.
About to install the JDM Forester STI bottom lip. I first have to remove my $12 garage lip.
Joined
·
5,314 Posts
Just finished installing the WRB JDM Bottom Lip! :woohoo: It looks bad donkey. I'll try and post up some pictures later.
I also applied JDM FSTI decals (cherry blossum red) on the front bumper.
Now, on to the Prova Air Oil Separator!
Joined
·
5,314 Posts
Installation of Prova Air/Oil Separator complete. Along w/ the Prova Black Anodized Oil Cap.
Took a bunch of pictures and will post them up later.
Completed projects on Easter Sunday....
1. Wash/Wax Exterior
2. Detailed Interior
3. Applied Aerospace 303 to all exterior/interior plastic components
4. Detailed the wheels
5. Installed JDM Rain Guards
6. Installed JDM Front Bumper lip (same as username: XT666)
7. Busted out the touch up paint and filled in any chips on the body
8. Installed Prova Air/Oil seperator
9. Installed Prova Oil Cap : )
10. Installed Subtle Alternator Cover (Black)
11. Installed JDM STI badge on rear hatch (beneath Forester logo)
12. Wiped down engine bay (quick half-donkey job)
13. Snapped pictures to post up on the forum and our website
Phew...talk about a productive day!
I already have a bunch of other things on the "to-do" list to take care of next weekend!
:woohoo:
Joined
·
5,314 Posts
Joined
·
5,314 Posts
Sweet! I'll have to check out your journal.
Joined
·
5,314 Posts
Invited Koyo to the house to have a new production version Radiator (SG Specfic) installed!!!
We also did a photoshoot (photos will be posted soon)!
We also did a photoshoot (photos will be posted soon)!
Joined
·
5,314 Posts
Not my Subie, but JE's (Preacher)....
Installed his Subtle Carbon Fiber Exhaust heatshield. I don't have any pictures, but it looks killer on top of the matt black vinyl.
FYI....we only have 3 of these heatshields left in stock!
Installed his Subtle Carbon Fiber Exhaust heatshield. I don't have any pictures, but it looks killer on top of the matt black vinyl.
FYI....we only have 3 of these heatshields left in stock!
Joined
·
5,314 Posts
Watched it shake in the driveway 20 mins ago. 5.9 earthquake in mexicali...felt it in H.B. tonight.
Joined
·
5,314 Posts
Washed, waxed, cleaned engine bay, dusted center console, installed Subtle alternator cover (pink) and JDM F License Delete (Black) w/ pink backer plate.
Pretty much, gettin' ready for S3 (Subaru Summer Solstice) event tomorrow in San Diego.
![]()
![]()
Pretty much, gettin' ready for S3 (Subaru Summer Solstice) event tomorrow in San Diego.
Joined
·
5,314 Posts
Showed it off along with all of our Subtle products at: S3 (Subaru Summer Solstice 2010 (Torrey Pines, CA))
Joined
·
5,314 Posts
Replaced my 08 sports headlamps w/ custom blacked out headlamps.
Debating if I should send off the extra 08's to Lightwerkz.
Debating if I should send off the extra 08's to Lightwerkz.
1 - 20 of 18467 Posts
Join the discussion
