@baldymech
Snow3d covers most of the salient angles.
I did my belt, idlers and water pump on my 2010 at 58k. IMHO it's a false economy not to perform this maintenance because if one of the idlers seizes it will junk the engine, irrespective of belt condition.
Use the opportunity to replace your coolant and thermostat.
Tip - use the Aisin kit and avoid the Gates' kit.
Snow3d covers most of the salient angles.
I did my belt, idlers and water pump on my 2010 at 58k. IMHO it's a false economy not to perform this maintenance because if one of the idlers seizes it will junk the engine, irrespective of belt condition.
Use the opportunity to replace your coolant and thermostat.
Tip - use the Aisin kit and avoid the Gates' kit.
