Subaru Forester Owners Forum banner
1 - 1 of 1 Posts

2011 2.5x Auto
346 Posts

Push pins: you could try putting a washer underneath the head before insertion.

Rattles: Try pushing on the closed hatch door to see if there is any movement. If so, you can tighten it by adding some foam rubber to the points on the body where the rubber travel limiters touch. These limiters are on the hatch door near the struts.

Other possible rattles: loose spare tire, tools, license plate (needs 4 screws).
I remember someone had a strut making a noise. He covered it in pipe insulation foam from a plumbing store.
Sometimes the rear seats are loose -add some tape to the latch.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.