Subaru Forester Owners Forum banner
1 - 6 of 6 Posts

·
Registered
2006 FXT
Joined
·
63 Posts
Discussion Starter · #1 ·
I got my Kenwood DNX9240BT next project is add reverse camera to my 2006 XT.

Everythyting else is seems to be easy but where can i find this B99 connector?
I will take signal from this connector and Br/Y lead.

Can someone hotlink this pic please, because this site wont allow me to do it... :crazy:
hteeteepee://f.imagehost.org/view/0602/B99
 

·
Pleiads' biggest leghumper
04's 2 FXT's.
Joined
·
6,623 Posts
Reverse Light brown/yellow + passenger kick, harness to rear

Speed Sense green/yellow ECM, 35 pin plug, pin 12 or 13

Parking Brake lt. green to lt. green/black - parking brake switch


joe r
 

·
Registered
2006 FXT
Joined
·
63 Posts
Discussion Starter · #3 · (Edited)
Reverse Light brown/yellow + passenger kick, harness to rear

Speed Sense green/yellow ECM, 35 pin plug, pin 12 or 13

Parking Brake lt. green to lt. green/black - parking brake switch


joe r
Thanks, so it is passangers side behind doorside kickpanel?
I have all schematics, this connectors (marked on prev pic.) exact location was only mystery...


I allready got parking brake and steeringwheel controls working.
HU has internal GPS so no need of speedsense.
 

·
Premium Member
07 Forester XT
Joined
·
5,535 Posts
I didn't find there was enough slack to tap in nicely so I ran some 22gauge wire down the side and pulled the signal from the reverse light in the rear. Had to run the video wire for the cam so it was all apart anyway.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top