[staffychance]

Hi my SF5 Turbo is from a standing start does not pull smooth, in fact i doesnt really pull, like a hug flat spot from 1000 rpm to around 2500 rpm, above 3000 rpm she pulls like a train.

When i do accelarate from 1000rpm to 2500rpm its really jerky like im aout to run out of fuel and its gettin=g really anoying now.

Could the be the Air Flow Meter if so how can i be sure, can i test it in any way.

 

[dreske]

I got the same for awhile, I had a oil pump leak which I fixed and the crank position sensor (under the alternator) had alot of oil on it, cleaned it up and dont seem to get it now but not to sure if thats the case, used to think it was a cold clutch slipping as I get mean shudder under load when cold and humid in 1st gear take off, also its late on the pedal but will bleed soon

gona change plugs next to make sure its not miss firing, outside this im not sure bro