Subaru Forester Owners Forum banner
1 - 3 of 3 Posts

2008 Forester XT
49 Posts
Discussion Starter · #1 ·
Hey all. I'm hoping you can help me with my '08 forester xt.

I went to replace my outrigger bushings today. When I was putting everything back together I noticed the passenger side top plate wasn't sliding down to the bushing because of the metal tube the bolt goes though stands about an inch taller than the bushing. This piece doidnt allow for the plate with the new bushing to fit properly. It sits with about an inch o space.

The passenger side actually fits perfectly. The bushing resting on the plate with the new outrigger bushing.

I'm hoping someone has experience with this. It seems like it should be the dame on both sides.

Thanks in advance.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.