Subaru Forester Owners Forum banner
1 - 3 of 3 Posts

·
Registered
2009 FXT TTT 5MT
Joined
·
258 Posts
Discussion Starter · #1 ·
Hello,

I'm in the process of installing an AEM Failsafe and will be cutting into the hose that comes out of the stock BOV for the boost feed.

When I look at the size of the vacuum hose T-connector that came from AEM, it looks a lot smaller than the BOV hose. Is the BOV hose wall really thick?

I guess what I'm after is the internal dimension of the BOV hose.

Many thanks,
Scott
 

·
Registered
2004 Forester XTi 4EAT
Joined
·
1,430 Posts
Probably easier if you slip one end off and measure it. It wont take more than two mins even if you unbolt the BOV from the TMIC.
 

·
Registered
2011 turbotek tuned fxt 4eat paddle shift
Joined
·
3,539 Posts
yes it is really thick this is were i t'd my boost gauge in the outer wall is just decieving.
 
1 - 3 of 3 Posts
Top