Subaru Forester Owners Forum banner
1 - 2 of 2 Posts

·
Registered
2010 Legacy GT LTD 6 spd
Joined
·
967 Posts
Discussion Starter · #1 ·
I went to my local, finally after a couple years of no local subie center one opened up, but anyway I decided to get the gaskets there and they had them in stock, ominous sign not doubt. But they don't look particularly impressive so I was hoping you guys could double check the part number for what I was sold so I can be sure to only do this job once.

This is on an 03 2.5 both heads are now leaking coolant slowly from the bottom or top or everywhere but it is collected at the bottom and seems to be leaking from there more than anywhere else. It is also now a grayish putty like color and cosistency. So part number for the replacement gasket is 11044AA633 and it is says this is an interchange for 11044AA630. These gaskets look no better than the felpros at autozone and at $40 a pop I need some assurance these will solve my problems or at least be worth the extra cash. I intended to buy the felpro head set but now I am not sure what I should do, so anyone with some experience or know how with an 03 or similar engine please chime in, thanks a lot guys.
 

·
Registered
2010 Legacy GT LTD 6 spd
Joined
·
967 Posts
Discussion Starter · #4 ·
I am thinking of going with the felpro kit as well, I have used them before on chevy v8s without issues, and the kit is $161 on rock auto so i am confident autozone will comp that price and they can get it in a day. So $87 for head gaskets or $160 for all the gaskets to the upper engine. Any input for timing kits?
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top