Really want to use a Scanguage 2, instead of having to mount gauges, but don't know what year JOBD started on cars here in Japan. My 1999 has a connector, but I can't connect the SG2 to it. Wife's 2005 Mazda has no problem connecting. Does anyone know when they first started using JOBD/ODB2 in Japan?
First year for JOBD/OBD2 on JDM Forester
Join the discussion
Recommended Reading
-
('19+) 2019 - Performance Chip?
Engine Management, Tuning and DataloggingHello Everyone, Just got a Forester Sport. First Subaru. Just exploring.... Has anyone successfully chipped a 2019 2.5 for the purpose of increased power? Does it make sense or not? What are the best chips for performance and reliablity. Any good ones that plug into OBD2? Any problems? Steve- 16
- 3K
-
('14-'18) 2015 - Knock when cruising?
Engine Management, Tuning and Datalogging2015 FXT 80k running cobb OTS stage one 91 map. Engine MODs: GFB BPV Getting a random knock around 2k RPM relatively consistantly at least once per drive. Knock is -5ish in feedback knock and fine knock learning. DAM drops to .875 but returns to 1 after a bit of driving after. I was running...- 2
- 164
-
OBD-II: Which logger and software to choose?
Engine Management, Tuning and DataloggingHi all, Sorry for the ‘newbie’-ness, but my head’s spinning a bit with OBD-II. Point me in the right direction please if this has been discussed or has FAQs elsewhere. I have a diesel forester and have been following the DPF woes (threads). I’m looking for an OBD-II interface to log data, plot...- 30
- 15K
-
('03-'05) 2005 - Speed Density Tuning?
Engine Management, Tuning and DataloggingReally surprised there are 0 threads here that discuss speed density tuning in lieu of a MAF sensor. I just received a Perrin 4-bar MAP sensor as a prerequisite for upgrading to a larger turbo, so I figure it’s time to get the ball rolling on switching to a speed density setup. For now, I’ll...- 10
- 4K
-
('98-'00) 1999 - SF5 S-Turbo Massively Over-Fueling?
Engine Management, Tuning and DataloggingHey guys, My SF5 has a huge over-fueling issue. The following items have been replaced and checked. Spark Plugs replaced MAF Sensor replaced TPS Sensor replaced 3 Port Boost solenoid replaced 555cc Injectors (16600-AA170) replaced Fuel Filter replaced Fuel Pump replaced Lambda checked Masses...- 2
- 286
Join now to ask and comment!