Subaru Forester Owners Forum banner

Status
Not open for further replies.
1 - 11 of 11 Posts

·
Registered
2006 FXT FSTi 6MT
Joined
·
746 Posts
Discussion Starter #1 (Edited)
ETS Intercooler and Kartboy Crankpulley

I'm parting out some of my go fast and engine bay parts. Everything came off the car as working. Available for pickup in San Diego, CA. Buyer pays shipping. Paypal, Venmo.

ETS top mount intercooler for 04-07 STI. 04-08 FXT. Does not include the Y-pipe. If your car can run the 04-07 STI OEM intercooler, then this should fit. 04-05 FXT owners will need to change BPV and the hose going to the inlet. Would recommend new Y-pipe and BPV gaskets. Throttle body coupler, t-bolt clamps, and hardware included. $400




Kartboy lightened crank pulley. This is the original design. Nothing wrong with it. $40



Planted Technology driver seat (left side) base. 93-07 Impreza/WRX/STI, 98-08 Forester. SOLD

Cobb SF intake with airbox. Fits 02-07 wrx/sti, 04-08 fxt. Filter will come cleaned oiled with K&N filter oil, Includes all the hardware and brackets. SOLD

AEM Dryflow filter with the filter wrap. Perfect size to fit the Cobb SF intake. Don’t have to worry about over oiling your filter and getting it on your MAF sensor. Filter wrap is just an extra layer of protection against water and dirt. SOLD

Cobb Silicone post MAF intake hose. Fits 02-07 wrx/sti, 04-08 fxt. Black, no signs of tearing or cutting from the hose clamps SOLD

Turbosmart Kompact BPV. Full Recirculating. Fits 02-07 wrx / 04+ STI / 06-08 FXT. Scratches are from the hardware and not seen when installed. SOLD

Subtle Solutions radiator shroud. Radiator shroud has been trimmed to fit a Koyorad radiator. (The alternator cover is sold) SOLD

Outfront Motorsports Topfeed Fuel Rails. New, never installed. Includes hardware and AN fittings. SOLD

Bride x Cusco Zeta III bucket seat. Authentic. Made in Japan. FRP/sparkle silver back. FIA approved. Includes the head pillow. SOLD
 

·
Registered
05 FXT's 05 IPT 4eat/ 05 w/ 08 sport conversion JDM STI Forester swapped
Joined
·
436 Posts
Pm sent for fuel rails

Sent from my Moto Z3 Play using Tapatalk
 

·
Registered
2007 Forester XT
Joined
·
17 Posts
I am definitely interested in that sf intake your got there for my 07'fxt at. As you mentioned it has all the hardware and mounting bracket, can you ship to 90717?
 

·
Registered
2006 FXT FSTi 6MT
Joined
·
746 Posts
Discussion Starter #5
I am definitely interested in that sf intake your got there for my 07'fxt at. As you mentioned it has all the hardware and mounting bracket, can you ship to 90717?
All the brackets and screws are there. Some hardware is reused from the stock box. Please PM me. Shipping would be an additional $10. Also I'll bundle in the post MAF hose and AEM filter if you're interested.
 

·
Registered
05 FXT's 05 IPT 4eat/ 05 w/ 08 sport conversion JDM STI Forester swapped
Joined
·
436 Posts
Any pictures of the tmic mounted in a FXT?
Or better yet.. ease of taking off and putting on?

I still haven't mounted the fuel rails yet! Lol

Sent from my Moto Z3 Play using Tapatalk
 

·
Registered
2006 FXT FSTi 6MT
Joined
·
746 Posts
Discussion Starter #10


Probably the easiest TMIC I've worked with. It's a bit shorter in profile so it clears the A/C line and falls into place a little bit easier than the STI TMIC.
 

·
Registered
05 FXT's 05 IPT 4eat/ 05 w/ 08 sport conversion JDM STI Forester swapped
Joined
·
436 Posts




Probably the easiest TMIC I've worked with. It's a bit shorter in profile so it clears the A/C line and falls into place a little bit easier than the STI TMIC.
If it's easier then the STI tmic.. It's WAY easier then the V8 STI tmic!!!! It's a mudderfudker!!!!!!!!

Which means this is as easy as my Spearco on my other one.. Hmm...


Sent from my Moto Z3 Play using Tapatalk
 
1 - 11 of 11 Posts
Status
Not open for further replies.
Top