Subaru Forester Owners Forum banner

Does Eye Sight need to be recalibrated after a lift? (merged thread)

3723 Views 5 Replies 6 Participants Last post by  KYKernel
Hi I consider instaling 2.0'' LIFT KIT on FORESTER 2019 I wander if there are any problems with the eyesite? Is it need adjustment or calibration
1 - 6 of 6 Posts
Does the Eye Sight system need to be calibrated after a two inch lift? So far it seems to work just fine.
Dips and rises in the road plus various vehicle sizes are all accommodated by Eyesight. I would leave it be.
Does the Eye Sight system need to be calibrated after a two inch lift? So far it seems to work just fine.
Subaru Eye Sight system is to be statically re-calibrated using the required OE targets.
Any time the vehicle has a lift installed or is lowered significantly, had a windshield replaced, Alignment performed - needs to be re-calibrated.

The system uses intended path and does slightly adapt, but nonetheless it does require static re-calibration to attain zeropoint for the current vehicle geometry.

Sent from my SM-G986U using Tapatalk
Hope everyone is doing well.

I was wondering do you need to recalibrate your eyesight system after lifting your 14 Forester XT?
Simple answer: see if it works the same after the lift. Lane centering, etc. if so, why would you spend money to change it?
1 - 6 of 6 Posts
Top