Subaru Forester Owners Forum banner
1 - 1 of 1 Posts

· Registered
2006 Forester XT 6 speed
118 Posts
Discussion Starter · #1 ·
So, I am in the process of doing my 6 speed swap and when I went to remove the outrigger, the drivers side bolt was seized and I ended up breaking the body nut loose. In the attached image, the bolt labeled 5 circled in blue, the nut that bolts in to is spinning loose inside the body. I cut the head of the bolt off to get the outrigger out but am at a bit of a loss as to how to tackle this issue. I can't be the first person this happened to, any and all feedback is welcome.


1 - 1 of 1 Posts