[Brian Lacey]

I don't know if anyone can give me a guesstimate for this but how much do you think it would be for.....
the piece of exhaust tubing that runs from the centerpipe ( resonator bit) to the backbox ? It would have to be bent by a custom exhaust place and have the hanger welded on and then welded to the ss backbox.

Cheers

Brian

 

[The Rookie]

A local exhaust place (powerflow I think it is that make them bespoke) charge about £150 for a replacement backbox, as the box itself is about £20, and you don't need a tailpipe added etc, I would guess at about £100 for fitting a new inlet pipe to match back to the centre.

Simon

 

[mdg]

The place i use quoted £80 for a custom SS center section inc fitting, but wouldn't touch it because of the wafer thin CAT/doughnut flange. Seems the price varies wildly between places.

 

[yorkshire forester]

I would've thought £100 would've done it Brian.

All this exhaust talk begs the question why they come in so many different sections. And why OEM isn't non-corroding steel or similar...

mike