The 2004 fozzy xt I had picked up went through an auto to manual swap. Everything works great but the cluster. I am going to tackle wiring it up this weekend but I am searching for any insight on here first. Yes I have searched Google but everything I could find is dated back to 2006 give or take. The sensor on the 5 speed tranny has 3 wires (solid green, striped green, and black) and the harness on the chassis it's going to only has two wires. Two of the three wires are connected and the third not connected to anything. From what I have researched it seems that the third wire is a signal wire and needs to be ran to the vss wire at the ecu. Can anyone confirm this or have wiring diagrams for the 2004 foresters? Any help is greatly appreciated, thank you very much!
39.4 KB Views: 114
67 KB Views: 46