Subaru Forester Owners Forum banner

About to find out if this Nissan/Honda guy likes a subaru

1362 Views 8 Replies 6 Participants Last post by  CNG Nut
I picked up a road hard put away wet 99 forester L

its blown 3 engines (lets hope its not cursed) and came without one, or a harness.

I have a EJ20 twin turbo I had gotten in plans to build an 818, but this car will need it first, and teach me about the brand.

It sounds like you guys greatly prefer OEM gaskets, so I'm off to the dealer soon to get oil pan and valve cover gaskets, and crank and cam seals and a rear main seal.

The plan is to put a WRX header, up pipe, and downpipe on the car so the engine will fit my left hand drive car.

I have some newbie questions:

What harness can I use for the engine?
How much power is the stock fuel pump good for?
What ECU will plug in or require the least amount of modification to work with the recommended harness.

The car is a bit of a whore, so I wont hesitate to cut the cross member to clear the up pipe, and im cheap and lazy.

I'll snap some pictures later when I get the new to me tires fitted.

Previous owners picture

The wheels about to be gloss black, and refitted, again previous owners picture
See less See more
1 - 4 of 9 Posts
Thanks for the tips flstffxe, I still will post my progress here. I am familiar with the ultra grey, is threebond a subi name?
Im not changing heads unless there is a problem. The cams are turbo cams, its low compression 2.0, single turbo, I am confident 02-07 WRX should be close enough to baseline. I am going with a equal length header. My turbo builder is also a tuner, and has seen 400 whp from 19 PSI using the the turbo he's putting together for me, didn't ask if that was 2.0 or 2.5, but I plan to keep things south of 16PSI being I still have a push style clutch, and stock drive line and brakes.
Ann Arbor is a stones throw away, the car is sitting in saline. Still got snow at the moment Automotive tire Tire Car Vehicle Rim

Sent from Free App
See less See more
1 - 4 of 9 Posts