Subaru Forester Owners Forum banner
1 - 1 of 1 Posts

377 Posts
If you don't have a Check Engine Light, I doubt the MAF sensor is the problem.

I've had problems on 2 occasions w/ the ignition module and it's apparently a pretty common source of problems. When no-start occurs you need to check for spark to cylinders. No spark pretty much says the ignition module is not working.

Also check that power (12V) is getting to ignition control module. If no power to the module, a faulty keyswitch assy may be the problem. Not as likely since you say all dash lights come on when engine dies.

good luck
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.