Subaru Forester Owners Forum banner
1 - 1 of 5 Posts

· Registered
2009 FXT and 2006 WRX wagon
437 Posts
15+ WRX and STI aluminum front control arms. If your oem control arms mount to a stud for the rear bushings, then you'll also need the 15+ bolts. For the front bushings, just get new oem and have a shop press them in.

Unless you're running a bigger swaybar or your endlinks are worn, nothing wrong with sticking with new oem.

A roll center kit by Whiteline or Superpro (ball joints and outer tie rods) is a nice kit, even if you're not lowered.
1 - 1 of 5 Posts