Subaru Forester Owners Forum banner
1 - 1 of 1 Posts

2007 Forester Sports XT 4EAT
42,849 Posts
Welcome to the forum from Oregon! :biggrin:

Aftermarket headers usually require wrapping, as they don't have a heat shield installed like the stock headers. If the header isn't stainless steel, I wouldn't recommend wrapping, as that will trap moisture on the pipe, causing it to rust & fail.
If it's the plastic engine undercover that's melting, you could remove the diaper & run that way. No diapers on either of our Foresters.

Also... the Google custom forum search is pretty good. :wink:

You can ask your technical questions here: Technical Forums and Vehicle Assistance


['07 FSXT MODding Journal] ['03 X MODding Journal]
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.