Subaru Forester Owners Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Picked up a 2004 forester xt from a guy who had it sitting next to his house for a couple years I finally stopped to talk about it and after negotiating ended up bringing it home gave her some love cleaning up then started on the engine just to find the turbo blew so violently it blew pieces back into the exhaust port on heads and broke the exhaust valve so I decided to get a JDM 2.0 long block to swap out and a new turbo set up got it all back together and was running great went for a test drive to see what the turbo was all about gave a bit of throttle it cut out and check engine light came on and cruse light started flashing had a buddy hook it to his snap on computer and it came up error code P0244 I have replaced almost all vacuum lines and throughly checked the few I didn’t replace. Kinda stumped at this point any suggestions or ideas would be greatly appreciated
 
1 - 1 of 1 Posts
Top