[MyForic2003]

Hello,

Mine is Forester 2003 XS;

Shown codes on OBD: P1443 and P0447;

I removed pressure control solenoid valve (shown on image) and checked it with direct voltage 12v and it works - close/open;

So can it be any other sensor ?

Thank you;

 

[MyForic2003]

Hello,

I checked with green connector test and both back and front(under the hood) solenoids works mechanically - they has sound during test.

So, now I have to dissassambly Purge Valve which is under the hood and check machanically ?

Thank you.

 

[MyForic2003]

@wtdash Absolutelly no any differece in behaviour then before this CEL lighted;
Not tried to fill tank yet, but added fuel several times - to 45-50 litres

Btw. today I uses my OBD ScanGauge to clear codes considering, that it will clear and then show again after Scan,
but as a result CEL also dissapered and during 10 minutes driving not appers anymore - no CEL, no Codes;

can I guess that it was some temporary issue or starting of some future issue ?