Subaru Forester Owners Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Motor Conversions
    Picked up a 2003 Forester X Auto trans that had a the timing belt snap. Found a motor from the same year (supposedly) from a yard, ej251, 134k, unknown auto or manualhad new belts and alternator and all seemed to be in order. Checked intake manifold/sensors, cam and crank gears and all seem to...
  2. Motor Conversions
    So brief run down on how I wound up at this point of 3 codes, P0340 is a hard code (Car will not start). So my original EJ251 engine had a unknown catastrophic failure (still have to tear down). But as it’s my daily my friend let me borrow his EJ253 block off his 05’ SABB 92X which had been...
  3. EJ25 - 2.5L Non-Turbo (1998-2010)
    Hi, I have crank no start situation. I have error code p0340. I have changed the camshaft sensor and the crankshaft sensor but still have no start and same code. I'm not a mechanic and don't know how to read a multimeter. But I have one and would like to try to test the circuits to both of...
1-3 of 3 Results