hello everyone, does anyone know, if the cross sports did have xenon as standard headlights? mine was imported and the headlights have been changed to Depos with halogen bulbs :-( i wanted to fit european xenon headlights, but i dont know if i have all the needed connectors and sonsors 😣 or isnt...

So I've been looking around trying to find a post from someone that has a JDM SG5 and use coilovers made for a USDM SG5 but I cant seem to find anything, can anyone help me out? I've been looking at getting a set of BC Coilovers (BC Racing BR Series Coilovers (SG)) but before I spend $1k+ I want...

Ok, so you all know it... The 08 FXT brakes are whack! I know, I know, I gotta get the brembos from an 04-06 STI, bla bla, kartboy thicker parking brake shoes and adapter plate, yadda yadda. I've gone down that rabbit hole. It's ends $2500 in the hole. But do I need the brembos? Probably not...

I’m sure everyone loves rare parts, but digging too deep and dropping a pretty penny is even more fun imo. Everyone should drop their favorite score or what rare piece you’re looking for! i just got these tail lights and i can’t wait to install them! Also hoping to score a garnish one day.

Hi, So my Stage 1 Exedy clutch is on the way out now I have upgraded the engine it has a few too many torques for the Exedy... If I go for a 'proper' drive, and use full power, it gets a bit burning clutch smell when I stop :rolleyes: I'm obviously only driving it softly for the time being...

Hey, I can't seem to find any information on tuning. I found a few posts about the same car as mine but it was a few years earlier (1998). my ecu is (1F 22611 AG380) would it be tunable with the right software or do i need to go with a Enduring Solutions or a ECULabs ecu addon? The main part I...

This is probably a dumb question but will the passenger side (left side) CV axle be the same as the driver side of a USDM model? Or will it be flipped? I noticed while changing my oil that the inner CV boot is torn, so I figured I'd replace the whole axle instead of dealing with re-packing a...

I have a pair of JDM headlights from an SG9. They fit the 2003-2005 SG. They have the smoke/gray housing and not orange reflector. They DO NOT include connectors or pigtails, you will need to fabricate your own. Both are tested and working (ballast, bulb, leveling motor). The leveling switch is...

Hi, I am new here. My name is Josh and I just recently got a manual 2003 Subaru Forester Xt imported to me. She’s wonderful however the rad needs replacement. Im looking for an oem one but i’m wondering if any NA subaru rads would fit. Any help would be appreciated!

Team, when I open the rear power lift gate on my USDM 2020 Forester Limited, it looks like there are three panel covers over left, right, and center positions. Thes provide access to the reverse lighting on the sides and gate latch in the middle. I can't seem to find any mention of accessories...

waiting for the new toy to be shipped from Japan. should be here by the end of October. Its getting shipped directly to my garage for its Ontario road inspection, but more importantly a big service and rust proofing before I hit the road! traded my new bought Mk6 Golf for a new Mk7 Golf and...

Hey guys, super excited to finally be a Subaru owner! Found a recently imported 01' SF5 w/ 24 000 kms...! Thought it was too good to be true but the car is in fantastic shape. The engine/other mechanical components are in great shape and the interior is immaculate! The exterior paint isn't the...

Hey guys, new here, I have a 03 Forester JDM that I'm almost positive came stock with HID. I'm trying to pass Inspection and had to replace the entire headlight assembly (old one was missing orange reflectors and wasn't DOT approved), the ones I got are made for H4 bulbs, I cant find any...

Hey all, my first post on here! Im in the middle of the 4eat to jdm fsti 6 speed. Having some problems lining up my shift linkages without having the upper shift linkage bind up on the trans tunnel. Im still using my factory fxt front subframe. Everything bolts up good but the shifter linkage...

Parts are located in Ventura CA. Prefer local pickup. Everything is used but in good shape. Just show some typical wear. Rally Innovations Light Bar. Comes with all necessary mounting hardware. $150 Forester Sport Mesh Grille. Black. Has a WRC badge on it not the Subaru badge. Badge has wear...

Hello all, long time lurker first time poster. I’m embarking on a bit of a frankenbuild, here it is: 2000 JDM st/b STI with a blown block Wanna drop a v7 EJ207 into it, strap a GT30r turbo to it and do all intake/exhaust work IPT tranny cuz I’m lazy and my left knee will not do the manual...

Hey guys I'm new to owning a forester. I just picked up my first a month ago and it's a 2017 XT touring. I love it and have been modding away with it but I just have a couple questions I couldn't find on the forum. I currently have these tail lights: Unfortunately the plug in the USDM version...

Here's a real quick background from this first time poster. I bought my teenage daughter a 2010 Forester 2.5X Limited (non-aspirated) as a repaired salvage title vehicle (this was my first Subaru) a little over a year ago. The vehicle ran and drove well upon before and after purchase. It...

Hello everyone and greetings from Zambia / Africa I drive a 2002 Subaru Forester X20 JDM. When I disconnected the power window switch it fell apart and now I struggle to put things back together. I went through a lot of wiring diagrams but none seems to fit. The following pins are not used in...

Hey guys — new to the Forester Family and couldn’t be happier. Recently imported a 2.0 L cross sports turbo from Japan to Canada and didn’t realize the headlights were wired for HID. Unfortunately, the DOT headlights I purchased to replace them are halogens so they won’t work for the current...