I just installed a blouch 18G on mine. First and most importantly we do not see anywhere near the same whp numbers as an equally equipped 5MT, so plan on seeing number more similar to the ones on the left above. So with that out of the way I'd say save some money and just go with the VF39 or 43/48 (depending on if you are worried about the cracking issues of the 39). If you just want more than you're getting with stage2 this will be fine. But again don't expect to see much more than 250whp because of the power robbing 4eat.
With an 8cm 18g I saw peak torque by about 2700 rpm so I'm not feeling much lag at all. All I notice is a bit more delay from a stop than with stage 2. And again that's with an 8cm hot side and a true large tdo6 housing.
__________________
06 FXT Limited 4EAT 18G powered.
|